BikeVis Support Forums

Please login or register.

Login with username, password and session length
Advanced search  

News:

BikeVis Bullet LED Pods are now in stock and shipping worldwide.

Author Topic: BikeVis HID / Xenon Conversion Kits  (Read 3221 times)

Fluke

  • BikeVis Owner
  • Administrator
  • Sr. Member
  • *****
  • Posts: 446
    • BikeVis
BikeVis HID / Xenon Conversion Kits
« on: September 12, 2009, 02:41:25 PM »
Here are some photos of what you can expect your bike to look like once a BikeVis HID / Xenon Conversion Kit is fitted. I run exactly the same kit on my bike and would not ride without it!


- 300% the light with a subtle hint of blue to aid night vision

- 10 times the bulb life

- 2/3rds the power drain

- super slim ballasts for easy location on your bike

- no more dim 'yellowness' of your stock headlight

- the single best way to increase visibility of your bike

- 6000k colour matches our BikeVis Bullet pods perfectly


HIDs are the future of motorcycle lighting and the kits we have sourced are the very best quality you can buy. Available in our online store.









Logged
Dan Bailey - BikeVis Owner

haisunled

  • Newbie
  • *
  • Posts: 1
Re: BikeVis HID / Xenon Conversion Kits
« Reply #1 on: July 19, 2010, 04:04:07 AM »
 :)  Dear Sir,      Are you suffering with car alarm problem when install HID kits?
HSUN HID kits make u have no problem, we supply several Can-bus HID standard and slim ballast to solve this problem for you.
Our ballast defective rate is less than 1%, bulb defective rate is less than 0.1%
And if there is any defective product, you do not need to send it back to us
Just send me photo, then we ship the new ones to u .More information, please visit our website: www.ledlightsfor.com
 Attached the photo for your reference
canbus slim 878.jpg50 canbus.jpgcanbus slim hlx.jpg
Why Choose CanBus Ballast ?
CanBus Ballast gets rid of the flickering issues or headlamp error light issue. This issue is known on most European cars (BMW/BENZ/AUDI/VW) and now it is occur on some American cars (CHRYSLER/DODGE/JEEP).
The reason behind this is due to halogen bulb being 55W and HID being 35W. Therefore, when an HID kit is installed into the vehicle, the car ECU detects the lights are running at 35W instead of the normal 55W. Two things will happen, when it detect this. 1. When running at 35W, the ECU thinks the light bulb on one side is broken and cut down on the power it sends to the headlight, causing the HID to flicker because there is not enough power. 2. It will cause a headlight error light on the dash because it think 1 side of the headlight is broken. One or both of these issues will occur.
How does Canbus Ballast work ?
This CanBus will trick the ECU into thinking the HID is running at 55W, when it is really running at 35W. This will trick the ECU into thinking that both side of the headlights are working fine and will allow the ECU to give the headlights full power to run properly, which will get rid of the flickering issue and error light issue. This Ballast is safe and will not damage any ECU or electrical wiring.
Special Bulbs with really good price like H15, 5202(H16) ,D1C/S/R,D3C/S/R,D4C/S/R, Green ,Purple, Pink, Blue ,Yellow colors are all available!!!
Best regards.
Yours sincerely, Beck
HAISUN LIGHTING TECHNOLOGY CO.,LTD
TEL: +0086-020-3787-1276 
MSN:sale2@ledlightsfor.com
Skype : haisunled   Yahoo:led.haisun@yahoo.com
WEB : http://www.ledlightsfor.com
Logged