BMW R1200 GS Installation

[acb13nrv]

Please note that cameras do not capture the brightness of the LED lighting used in our products


Hello,

yesterday I fitted the white bullet kit to my GS.

I connected it to the GPS plug in front of bike. In fact I cut the plug and made a plain connection.



Brown : ground
Red/white : 12V

(you could buy a male connector with cables from BMW for not cutting things off)

I fitted the bullets on front extension. I drilled a 5mm hole on that black plastic and routed the cables to connection place.





Canbus system doesn't complain due to low power consumption of the Bullets.

Bullets light up on 'contact on' position, and stay on for 1 minute after switch off.

[Fluke]

Thanks for the guide, really neat job

Regards