BikeVis Support Forums

BikeVis Products => Technical Support => Topic started by: Wanted on December 29, 2015, 08:24:32 AM

Title: PodMod on KTM 1190 running lights?? (video)
Post by: Wanted on December 29, 2015, 08:24:32 AM
Hi, I have been looking for a modulator that will work with the running lights of the KTM 1190 Adventure. I have linked a video where you can see the modulator in use (skip to 1:00 to see). Will the PodMod work on these led lights? Thanks.

https://www.youtube.com/watch?v=0kegwBjMjwI (https://www.youtube.com/watch?v=0kegwBjMjwI)
Title: Re: PodMod on KTM 1190 running lights?? (video)
Post by: Fluke on December 29, 2015, 05:23:44 PM
Hi

Quite a neat effect on those KTMs.  :)

The PodMod is a much faster modulation... the only tricky thing is going to be down to power consumption.

The little PodMod is only designed for 200mA (0.2A), how much power those lights consume I'm not sure... they may well be much more. (quite likely given the size of them)

The only way to find a suitable modulator would be to break the positive feed to the running light and measure the DC current to them with a meter. This could be quite a mission though if you are not handy with electrics and meters.

Let me know your thoughts.

Regards