BikeVis Support Forums

Company Related => News => Topic started by: Fluke on September 02, 2011, 09:57:45 AM

Title: BikeVis Bullets Version 2
Post by: Fluke on September 02, 2011, 09:57:45 AM
We are pleased to announce that all of our popular BikeVis [url=https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights]Bullet (https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights/)[/url] running lights now being shipped from this website have been up rated. The newer Bullets will also filter down to our dealers over the next few weeks.

Though we have always been happy with our little Bullet (https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights) lights we wanted more power, and after a year of struggling to find a suitable LED chip we have managed to cram more light into the same tiny package. The design remains unchanged, keeping the same tough epoxy face of the newer Bullets from this year.


On a light meter we measured over twice the light, but to the eye they look many times brighter. The power consumption is up to 1 Watt per Bullet (https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights), but this is still a tiny load even for the smallest motorcycle out there!

Photo comparing old with new, totally overwhelming the camera...   (photos have not been edited at all)

(https://www.bikevis.com/images/version_2_bullets.jpg)


Specs:

Supply Voltage: 12-14.5vDC
Operating Current: 72mA per Bullet (https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights) or 0.072 Amps @14.5vDC
Power Rating:  1 Watt per Bullet (https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights)
Life Expectancy: >50,000Hrs


Regards
Title: Re: BikeVis Bullets Version 2
Post by: Fluke on September 12, 2011, 06:51:43 AM
This GT250R has two sets of Bullet 2s

(https://www.bikevis.com/images/gallery/hyosung_gt250r_2/gt250r_1.jpg)

(https://www.bikevis.com/images/gallery/hyosung_gt250r_2/gt250r_2.jpg)