BikeVis Support Forums

General Motorcycle => General Lighting Chat => Topic started by: brokenbill on May 14, 2016, 04:38:06 PM

Title: yoshimura bking tail light fault
Post by: brokenbill on May 14, 2016, 04:38:06 PM
Hi everyone.

I've got a fault with mine. led normal lights are working but no brake lights. these are led yoshimura  that came with the cans. I've tested the loom and all okay. can I get the brake light ones replaced?

any help gratefully received?

cheers,  Bill
Title: Re: yoshimura bking tail light fault
Post by: Fluke on May 15, 2016, 04:47:35 AM
Hi and welcome

Does the Yoshi tail light replacement include a brake function within the cluster ? (separate brake wire)

Regards
Title: Re: yoshimura bking tail light fault
Post by: brokenbill on May 15, 2016, 10:41:16 AM
Hi Luke,

thanks for getting back to me, yes it does
Title: Re: yoshimura bking tail light fault
Post by: Fluke on May 15, 2016, 11:41:48 AM
Thanks for getting back.

It's probably a sealed unit ?.... if you can get in it's probably a poor connection as the LEDs themselves tend to have extremely long life.

You are getting a switched voltage from the brake wire ok ?
Title: Re: yoshimura bking tail light fault
Post by: brokenbill on May 16, 2016, 10:15:14 PM
Yep, voltage is fine. will have to see if I can get into it?
Title: Re: yoshimura bking tail light fault
Post by: Fluke on May 17, 2016, 03:23:38 AM
Hi, I think so... give it a visual inspection. I suspect there is a bad connection in there