Do I have to drill holes on the outside of my fairing ?

Started by Fluke, July 24, 2009, 11:33:13 AM

Previous topic - Next topic

Fluke

Do I have to drill holes on the outside of my fairing ?

No you don't.

Though our Bullets are designed for a flush / neat fit and require a tiny (4mm) hole for the power wire, as they are so small you are not limited to mounting them on the outside of your fairing.

There are plenty of places you could mount a Bullet Kit where if you later wanted to remove them it would not show. Example places include...

Under nose cone
Within front wheel arch (inside of fairing)
In Ram Air ducts
Under wing mirrors
Under Indicators


The possibilities are only limited by your imagination. No fixings / Screws are needed as they are self adhesive.