BikeVis Tail-Brake Converter with existing LED Lights

Started by Ramashek, February 13, 2016, 06:58:57 PM

Previous topic - Next topic

Ramashek

I've got a problem I'm currently stumped on...


My lights are set up as the attached image shows, pretty straight forward as far as splicing it all in. All the usual works, indicators are fine, and the switched brake is also fine, however, the running light, while working for the bullets, stops my normal running light working. When I disconnect the running light wire from the system, my normal running light is works fine.


Any idea on a work around?

Fluke

Hi

Sorry for not getting back sooner as been away on holidays.

Did you solve this... if not I would suggest taking the 'always live' feed to the tail brake unit from elsewhere. (some other switched live on the bike, like a splice into a parking light for example)

Regards