Eddie sent over this guide showing his install of some little Red Bullet lights on the back of his Yamaha FJR1300. Thanks for sharing.
Pic 1 easy connect to existing wiring
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_1.jpg)
Pic 2 Lamp holder returned, modulator in situ.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_2.jpg)
Pic 3 wider angle view of 2.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_3.jpg)
Pic 4 Lights on as normal.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_4.jpg)
Pic 5 Holes drilled and cables fed through.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_5.jpg)
Pic 6 Bullets fixed in place.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_6.jpg)
Pic 7 Cables tidyed and fixed.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_7.jpg)
Pic 8 All connected and showing lights in running mode.
(https://www.bikevis.com/images/gallery/yamaha_xjr1300_5/xjr1300_8.jpg)
Just a quick comment - you can get red scotchloks (plenty on Ebay) that are slightly smaller and will easily handle the low ampages the bullets use. Might be better for those smaller spaces to fit it all in.
Thanks for the tip.... We must look at stocking connection gear