Author Topic: Burn-in testing  (Read 3430 times)

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1535
Burn-in testing
« on: September 12, 2009, 12:55:11 PM »
All our LED lights shipped are currently tested twice, the 2nd time includes light meter testing to ensure brightness levels are correct.

From today all lights manufactured will include a burn in period (at least 12hrs) to ensure the LEDs perform over a set period of time.

Photo below shows around 70 Bullet LEDs on soak..