Author Topic: BikeVis Tail-Brake Converter with existing LED Lights  (Read 2011 times)

Ramashek

  • Newbie
  • *
  • Posts: 1
BikeVis Tail-Brake Converter with existing LED Lights
« on: February 13, 2016, 07:58:57 PM »
I've got a problem I'm currently stumped on...


My lights are set up as the attached image shows, pretty straight forward as far as splicing it all in. All the usual works, indicators are fine, and the switched brake is also fine, however, the running light, while working for the bullets, stops my normal running light working. When I disconnect the running light wire from the system, my normal running light is works fine.


Any idea on a work around?

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1534
Re: BikeVis Tail-Brake Converter with existing LED Lights
« Reply #1 on: February 27, 2016, 03:42:39 PM »
Hi

Sorry for not getting back sooner as been away on holidays.

Did you solve this... if not I would suggest taking the 'always live' feed to the tail brake unit from elsewhere. (some other switched live on the bike, like a splice into a parking light for example)

Regards