Author Topic: Resolved: LED Running Light Pods  (Read 4584 times)

wonbyone

  • Newbie
  • *
  • Posts: 5
Resolved: LED Running Light Pods
« on: June 12, 2010, 02:14:49 PM »
I have ordered the bullets and now see the PODS and would like to know more about the adjustability of the mounting bracket.
Are there any pics of this bracket. How is it adjustable? This would help solve the "finding a flat surface 90 degrees " from the direction of travel issue.  I have a good location for the bullets, just wanted to know more about the PODs and the bracket.
Thanks.   --Bill

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1555
Re: LED Running Light Pods
« Reply #1 on: June 12, 2010, 05:59:36 PM »
Hi Bill

I'll get come more photos with detail of the bracket posted up Monday morning for you

Regards

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1555
Re: LED Running Light Pods
« Reply #2 on: June 13, 2010, 05:07:54 PM »
Hi

Hope the below helps...

Here is some photos of the Pod, showing the bracket and how it can be adjusted.... goes from flat / flush with body and travels right round 180 degrees. Sorry for bad iPhone photos....









The bracket itself is approx 80mm * 28mm, the complete unit is 110mm *   38mm * 20mm (20mm from flat face of bracket to top of pod)





RCE

  • Jr. Member
  • **
  • Posts: 65
Re: LED Running Light Pods
« Reply #3 on: June 13, 2010, 09:42:33 PM »
Apple forgot to put their watermark on the last three pictures  :-X

wonbyone

  • Newbie
  • *
  • Posts: 5
Re: LED Running Light Pods
« Reply #4 on: June 14, 2010, 12:41:35 PM »
That helps a lot thank you.  Can you comment on the LED emitter output compared to the Bullet?

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1555
Re: LED Running Light Pods
« Reply #5 on: June 15, 2010, 09:04:11 AM »
Hi

They appear much brighter in daylight as they use a E Marked Lens over multiple LEDs.

Regards