Author Topic: BikeVis Bullets Version 2  (Read 5536 times)

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1512
BikeVis Bullets Version 2
« on: September 02, 2011, 09:57:45 AM »
We are pleased to announce that all of our popular BikeVis [url=https://www.bikevis.com/product/bikevis-bullets-v2-motorcycle-running-lights]Bullet[/url] running lights now being shipped from this website have been up rated. The newer Bullets will also filter down to our dealers over the next few weeks.

Though we have always been happy with our little Bullet lights we wanted more power, and after a year of struggling to find a suitable LED chip we have managed to cram more light into the same tiny package. The design remains unchanged, keeping the same tough epoxy face of the newer Bullets from this year.


On a light meter we measured over twice the light, but to the eye they look many times brighter. The power consumption is up to 1 Watt per Bullet, but this is still a tiny load even for the smallest motorcycle out there!

Photo comparing old with new, totally overwhelming the camera...   (photos have not been edited at all)




Specs:

Supply Voltage: 12-14.5vDC
Operating Current: 72mA per Bullet or 0.072 Amps @14.5vDC
Power Rating:  1 Watt per Bullet
Life Expectancy: >50,000Hrs


Regards

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1512
Re: BikeVis Bullets Version 2
« Reply #1 on: September 12, 2011, 06:51:43 AM »
This GT250R has two sets of Bullet 2s