brake flasher – BikeVis https://www.bikevis.com Unique lighting products for your Motorcycle Fri, 25 Sep 2020 05:08:20 +0000 en-US hourly 1 https://wordpress.org/?v=6.9.1 https://www.bikevis.com/wp-content/uploads/2016/12/cropped-favicon-1-32x32.jpg brake flasher – BikeVis https://www.bikevis.com 32 32 SMiDSY Brake Light Flasher https://www.bikevis.com/product/motorcycle-smidsy-brake-light-flasher/?utm_source=rss&utm_medium=rss&utm_campaign=motorcycle-smidsy-brake-light-flasher Mon, 12 Sep 2016 12:05:12 +0000 http://www.bikevis.com/newsite/product/motorcycle-smidsy-brake-light-flasher/

Upon applying the brakes, the brake light will flash rapidly for 2 seconds and then go on solid. Re-applying the brakes within 8 seconds of release and the brake light will go on solid. This is to avoid distracting the driver behind in stop / go traffic.

This unit is designed for normal halogen bulb brake lights… If you have LED for your rear brake please use our BikeVis LED Brake Modulator.

Installation is easy if you have basic electrical knowledge, don’t worry if you don’t though, just buy a mate a beer or two and get him to do it for you! Full installation instructions are supplied along with all parts needed and is usually fitted in around 30 minutes.

Key Features

  • Unique miniature design especially for Motorcycles.
  • Combat the chance of cars running into the back of your motorcycle.
  • Weather proof.
  • Microprocessor controlled for reliability.
  • Lifetime technical support.
  • 2 Year no quibble warranty.
  • 55 Watt rated so able to modulate all standard halogen based lights.

Kit Contents

  • SMiDSY Brake Light Flasher / Modulator.
  • Pre-wired for easy connection to your bike.
  • Fitting Instructions (Download PDF).
  • Cable ties to keep wires tidy.
]]> BikeVis LED Brake Light Modulator https://www.bikevis.com/product/bikevis-led-brake-light-modulator/?utm_source=rss&utm_medium=rss&utm_campaign=bikevis-led-brake-light-modulator Mon, 12 Sep 2016 11:55:47 +0000 http://www.bikevis.com/newsite/product/bikevis-led-brake-light-modulator/

In normal use the modulator holds your brake light LEDs at 33%, this can add to the rear visibility of your motorcycle in normal use depending on your bikes light set-up.

When you apply the brake the modulator turns on your brake lights for half a second then flashes the brake light 10 times a second for 1.5 seconds, finally then lighting them constantly.

The effect this has is to ensure cars travelling behind see you’re braking, which is often a cause of accidents. (I myself have once been ‘pushed’ into oncoming traffic at a junction)

If you re-apply your brake within 5 seconds your Brake Lights work as normal to avoid annoying other road users in heavy traffic.

Though there are many of these units on the market most are sold for use on both normal filament bulbs and LEDs, and because of this design they do not take advantage of the LEDs used on modern motorcycles (extremely fast switching rates possible)

The BikeVis LED Brake Modulator is unique in this respect and produces an effect that none other can. I would not ride without one.

Key Features

  • Unique miniature design especially for Motorcycles.
  • Produces unique rapid flash that only a unit designed for LEDs.
  • Combat the chance of cars running into the back of your motorcycle.
  • Weather proof.
  • Microprocessor controlled for reliability.
  • Lifetime technical support.
  • 2 Year no quibble warranty.
  • 55 Watt rated so able to modulate all LED tail lights no matter how many.

Kit Contents

  • BikeVis LED Brake Light Modulator.
  • Pre-wired for easy connection to your bike.
  • Fitting Instructions (Download PDF).
  • Cable ties to keep wires tidy.

Compatibility

This unit is only for motorcycles with LED brake lights and your bike must have a separate brake light wire to turn on the modulator. If you are unsure please contact us.

]]>