led motorcycle lights – BikeVis

Vision X Solstice Solo Lights

Dan Bailey — Mon, 12 Sep 2016 16:43:29 +0000

The all new Solstice Series of LED lamps is equipped with Vision’s brand new 10 watt LED technology, with each 10 watt Solo producing 900 lumen making them the brightest LED lamp on the market in only a 2” x 2” square housing. Not only are they the brightest, they are the most efficient with the light drawing only 0.75 amps due to their advanced electronic drivers which are also responsible for their 50,000 hour life span.

The Vision X LED’s are housed in a rugged die-cast aluminium housing for optimum durability and heat dissipation. The housings are IP68 rated so that they’re impenetrable to dust and submersible under water up to 3 meters. The unbreakable poly carbonate lenses are housed by a 6061 aluminium face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The s1103 LED’s have been subjected to a 14Grms vibration test to ensure their performance in high impact conditions.

Key Features

Small design perfect for Motorcycles (2 inches square).
10 Watt 900 Lumen LED Technology (similar in colour to HID / Xenon).
Easy to fit design with adjustable angle.
Highest Light Output Per Cubic Inch on the Market.
Waterproof (3m depth).
1 year warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Philips X-treme Vision 100%

Dan Bailey — Mon, 12 Sep 2016 16:40:34 +0000

The lamps, which are fully road legal and suitable for use in plastic lenses, are great for those that spend considerable time driving at night, especially in country areas. They are good for motorcycles with single front lamps, as the overall light increase gives similar illumination to a pair or ordinary headlights. The brighter, whiter light output also makes your vehicle more visible to pedestrians and other road users.

The performance gain is achieved through a new unique filament design, optimized geometry, a quartz burner and high pressure gas filling to deliver maximum light output and longer life expectancy. The end result is safer night time driving with greater visible distance.

These bulbs are the very best on the market in our opinion, even surpassing the legendary Osram Nightbreaker Plus.

Key Features

Direct replacement for Motorcycle headlight bulbs.
UV Cut to protect plastic lenses.
Up to 100% the light output of stock Motorcycle bulbs.
Superb night vision.
DOT Approved and legal for use with all headlight units.
1 year warranty.
H4 rated 55 / 60 Watt, H7 rated 55 Watt.

Options

Philips X-treme Vision 100% are available in H4 (low and high beam single bulb) and the popular H7 single filament and priced per single bulb.

BikeVis Bullets v1 Motorcycle Running Lights

Dan Bailey — Mon, 12 Sep 2016 16:35:54 +0000

Please note these Bullets are the old version 1 lights, and as such not as bright as our current model.

BikeVis Bullets can be mounted just about any motorcycle and in any location depending on how you want your machine to look, be it on the side of a fairing, tucked away in a ram air scoop or in a wheel arch.

They can be modulated with our PodMod v2 modulator.

Also known as ‘Daytime Running Lights (DRL)’, ‘Driving Lights’, ‘Safety Lights’, ‘Marker Lights’ and ‘LED Spotlights’, the name doesn’t matter but we are sure you’ll love them as do the thousands of other motorcyclists already running them worldwide.

Key Features

Unique miniature design especially for motorcycles (one inch in length).
Ultra bright (white version similar in colour to HID / Xenon and more than 60 lumens).
Motorcycle accessory of the year 2009 – WebBikeWorld.
2 pairs can be modulated with our PodMod v2 modulator.
4 Star rating – Motorcycle Consumer News.
As used in Moto3, BSB and IOM TT race series.
Easy to fit design.
Wide angle visibility.
Weather proof.
Ultra low power (72mA / 1 Watt per Bullet pod yet brighter than 5 Watt sidelights).
Ultra long life.
Lifetime technical support.
1 Year no quibble warranty.
Hand made in the UK by bikers for bikers.

Videos

Kit Contents

2 * BikeVis Bullet LED pods.
1m of wire pre-wired to each pod.
High powered 3M tape for hassle free and safe fitting to your motorcycle.
Templates for mounting.
Fitting Instructions (Download PDF).
Cable ties to keep wires tidy.

Options & Discounts

White light is recommended for motorcycle forward facing use.

Red light is recommended for motorcycle rear facing or braking.

BikeVis T10 501 Wedge LEDs v2

Dan Bailey — Mon, 12 Sep 2016 07:51:46 +0000

Producing a much brighter light than a normal filament bulb at a fraction of the power. It’s an easy upgrade to get your motorcycle noticed and available from us in a wide range of colours.

These version 2 bulbs are over twice the brightness of our previous model.

Best of all, the White model produces exactly the same Xenon / HID colour light as our popular BikeVis Bullet pods, so are a great modification to do at the same time!.

These bulbs will fit / upgrade all bikes from 2001 onward and can be used as a direct replacement as long as you have forward facing sidelights (they are not BMW CANBUS compatible).

Key Features

Direct replacement for Motorcycle headlight bulbs.
UV Cut to protect plastic lenses.
Wide angle visibility.
Ultra low power (72mA 1 Watt per LED yet brighter than 5W sidelights).
Ultra long life (> 50,000hrs).
Lifetime tech support to help you with installation problems or questions.

Kit Contents

2 * Sidelight Wedge LEDs.
Fitting Instructions (Download PDF).

Rigid Industries Duallys

Dan Bailey — Sun, 11 Sep 2016 14:39:27 +0000

With this kind of output you will wonder how you ever got by on twisty roads at night with a normal filament headlight (or even a HID Xenon)

As light bulbs age, their colour consistency and brightness diminishes. New replacement bulbs will look noticeably different compared to the remaining bulbs. Customized LED binning ensures only the highest consistency of LED colour and brightness for manufacturing of your Rigid LED products. Rigid LED Lights are turned on quickly and efficiently with little battery draw. HID and Xenon technologies quickly drain huge amounts current at start up in order to power the bulbs.

WARNING: These lights are so bright we would urge any owner to please be courteous when other traffic is around and switch them off!. For constant use everyday lights checkout our Cree Aux Lights

Key Features

20 degree flood or 10 degree spot pattern.
20 Watt 1568 Lumen LED Technology.
Small size perfect for Motorcycles (light face is 75mm sq. Depth is 80mm).
Easy to fit design single bolt mounting.
Unbreakable Lexan Lens.
Plug and Play Wiring Harness with Switch.
50,000+ hour life span.
IP68 rating (will operate submerged in water).
1 Year no quibble warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Kit Contents

2 * Rigid Industry Dually Light Pods.
Wiring Harness and Switch.

Options

10° SPOT BEAM – High beam supplement (recommended).
20° FLOOD BEAM – Low beam supplement / Fog lighting.
COMBO – One 10° Spot and one 20° Elliptical light.

**please note these lights cannot be modulated due to high brightness and power consumption.

BikeVis Cree LED Aux Lights

Dan Bailey — Sun, 11 Sep 2016 14:30:00 +0000

The new BikeVis Cree LED Auxiliary (Aux) lights gives all the performance of more expensive brands for less money, without sacrificing quality or specs. In fact they use exactly the same LED as the market leading lights.

Rated at an eye popping 900 Lumens (300 more than the v2 lights they are replacing) for just 10 Watts consumption you won’t be missed on the road. These lights will cut through even the brightest sunlight.

They are constructed with an all alloy housing and high quality stainless steel brackets, meaning they are built to last through the very worst of road conditions.

If you wish to mount to engine / crash bars please see our Clamps.

Key Features

Small design perfect for Motorcycles (just 40mm lens diameter).
10 Watt 900 Lumen Cree LED Technology (6000k colour).
Low power, just 0.66 Amps per light @ 14.5vDC.
IP68 Sealed, Waterproof (1m depth).
Easy to fit design.
Ultra long life (>50,000hrs).
Weather proof.
Can be engine / crash bar mounted with our Clamps
Lifetime technical support.
2 Year no quibble warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions including complete salt water submersion for one month while running.

Videos

Kit Contents

2 * BikeVis Cree LED Aux Lights.
2 * Deutsch harness with 1m of cable for easy wiring.
Installation Guide (Download PDF).
Cable ties to keep wires tidy.

**please note these lights cannot be modulated due to high brightness and power consumption.

BikeVis Tail-Brake Converter

Dan Bailey — Sun, 11 Sep 2016 14:07:43 +0000

This unit is perfect for anyone wanting to enhance the rear visibility of their motorcycle when using our Red Bullet lights for rear use. When your brake is applied any pair of Red Bullets connected will increase in brightness.

Kit Contents

Red Bullet Tail / Brake Converter (Converter only.. Bullet lights sold separately).
Wire pre-wired onto pod.
Fitting Instructions (Download PDF).
Cable ties to keep wires tidy.

Key Features

Unique miniature design especially for Motorcycles.
Gives Tail / Brake function to one pair of Red Bullet lights.
Easy to fit design.
Weather proof.
Lifetime technical support.
2 Year no quibble warranty.

BikeVis LED Running Light Strips

Dan Bailey — Sun, 11 Sep 2016 11:11:42 +0000

Our LED Running Light Strips are the perfect addition to any motorcycle to help your bike look different, and in turn get seen!.

The nine LED strips are flexible and allow for fixing even on curved surfaces like fairings, air intakes and wing mirrors depending on how you want your bike to look. The small size and almost flush finish makes them great on all motorcycles including the smallest of sports machines.

They are supplied with a 3M fixing for super fast / safe installation.

They can be made to constantly ‘glint’ with our PodMod v2 modulator which further adds to visibility.

Also known as ‘Daytime Running Lights (DRLs)’, ‘Driving Lights’, ‘Safety Lights’ and ‘Marker Lights’.

Key Features

Miniature design perfect for Motorcycles (150 * 15 * 10mm).
Ultra bright 9 LED design (similar in colour to HID / Xenon).
Easy to fit and flexible for curved and flat surfaces.
Wide angle visibility.
Weather proof / Totally encapsulated.
Ultra low power (30mA 1/3 Watt per Strip).
Ultra long life (> 50,000hrs).
Lifetime technical support.
2 Year no quibble warranty.
High-powered 3M tape for hassle free and safe fitting to your motorcycle.
Can be made to constantly ‘glint’ with our PodMod v2 modulator.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Kit Contents

2 * LED Running Light Strips.
Wire pre-wired onto each pod.
Installation Guide (Download PDF).
Cable ties to keep wires tidy.

BikeVis LED Mini Light Pods

Dan Bailey — Sun, 11 Sep 2016 11:04:59 +0000

Our LED Mini Daytime Running Light Pods (DRL) are tiny light pods producing a bright focused beam of light.

We sourced these pods after testing dozens, and their small size, performance and great quality mean they are ideal for motorcycles and a cut above the rest out there..

They are supplied with an adjustable fixing bracket. They can be made to constantly ‘glint’ with our PodMod v2 modulator which further adds to visibility.

Also known as ‘Daytime Running Lights (DRLs)’, ‘Driving Lights’, ‘Safety Lights’ and ‘Marker Lights’.

Key Features

Miniature design perfect for Motorcycles (H24 x W112 x D37mm).
Ultra bright 8 LED design (similar in colour to HID / Xenon).
Easy to fit design with adjustable angle.
Wide angle visibility.
Weather proof.
Ultra low power (60mA 3/4 Watt per Pod).
Ultra long life (> 50,000hrs).
Lifetime technical support.
2 Year no quibble warranty.
Can be made to constantly ‘glint’ with our PodMod v2 modulator.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Kit Contents

2 * LED Mini Running Light Pods.
Extra wire to help with install.
Installation Guide (Download PDF).
Cable ties to keep wires tidy.

BikeVis Cree v3 Motorcycle Running Lights

Dan Bailey — Sun, 11 Sep 2016 10:39:01 +0000

Our new v3 Cree LED Running Lights use the same wide angle / high quality lighting pods as our new BikeVis Aux Lights giving them class leading performance and specifications.

They are constructed with an all alloy housing and high quality stainless steel brackets, meaning they are built to last through the very worst of road conditions.

If you wish to mount to engine / crash bars please see our Clamps.

Key Features

Small design perfect for Motorcycles (just 40mm lens diameter).
10 Watt 900 Lumen Cree LED Technology (6000k colour).
Low power, just 0.66 Amps per light @ 14.5vDC.
IP68 Sealed, Waterproof (1m depth).
Easy to fit design.
Ultra long life (>50,000hrs).
Weather proof.
Can be engine / crash bar mounted with our Clamps
Lifetime technical support.
2 Year no quibble warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions including complete salt water submersion for one month while running.

Videos

Kit Contents

2 * BikeVis Cree v3 Running Lights.
2 * Deutsch harness with 1m of cable for easy wiring.
Installation Guide (Download PDF).
Cable ties to keep wires tidy.

**please note these lights cannot be modulated due to high brightness and power consumption.