Author Topic: Yamaha FJR1300 Installation  (Read 4305 times)

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1535
Yamaha FJR1300 Installation
« on: March 22, 2012, 07:38:24 AM »
Eddie sent over this guide showing his install of some little Red Bullet lights on the back of his Yamaha FJR1300. Thanks for sharing.



Pic 1  easy connect to existing wiring



Pic 2  Lamp holder returned, modulator in situ.



Pic 3  wider angle view of 2.



Pic 4  Lights on as normal.



Pic 5  Holes drilled and cables fed through.



Pic 6  Bullets fixed in place.



Pic 7  Cables tidyed and fixed.



Pic 8  All connected and showing lights in running mode.




Stooby

  • Newbie
  • *
  • Posts: 5
Re: Yamaha FJR1300 Installation
« Reply #1 on: March 22, 2012, 10:28:20 PM »
Just a quick comment - you can get red scotchloks (plenty on Ebay) that are slightly smaller and will easily handle the low ampages the bullets use. Might be better for those smaller spaces to fit it all in.

Fluke

  • BikeVis Owner
  • Administrator
  • Hero Member
  • *****
  • Posts: 1535
Re: Yamaha FJR1300 Installation
« Reply #2 on: March 23, 2012, 07:45:14 AM »
Thanks for the tip.... We must look at stocking connection gear