Clearance Stock – BikeVis

Compulsion Gallery Sculptures Ducati 916

Dan Bailey — Mon, 03 Jun 2019 06:30:46 +0000

This sculpture is incredibly rare and has been sitting on a shelf for many years and could probably do with a light clean.

It sits approx. 4.5 inches tall and looks great.

Compulsion Gallery Sculptures are cast in a high-density resin material which is then thermal coated by spraying it with molten pewter metal. Their innovative process is quite unique – producing a beautiful metallic object with the look, weight and cold feel of solid metal.

The company was dissolved in 2012 and only produced these exceptional products for 10-15 years.

Vision X Solstice Solo Lights

Dan Bailey — Mon, 12 Sep 2016 16:43:29 +0000

The all new Solstice Series of LED lamps is equipped with Vision’s brand new 10 watt LED technology, with each 10 watt Solo producing 900 lumen making them the brightest LED lamp on the market in only a 2” x 2” square housing. Not only are they the brightest, they are the most efficient with the light drawing only 0.75 amps due to their advanced electronic drivers which are also responsible for their 50,000 hour life span.

The Vision X LED’s are housed in a rugged die-cast aluminium housing for optimum durability and heat dissipation. The housings are IP68 rated so that they’re impenetrable to dust and submersible under water up to 3 meters. The unbreakable poly carbonate lenses are housed by a 6061 aluminium face plate which doubles as a radiant heat sink to melt away snow and ice in frigid conditions. The s1103 LED’s have been subjected to a 14Grms vibration test to ensure their performance in high impact conditions.

Key Features

Small design perfect for Motorcycles (2 inches square).
10 Watt 900 Lumen LED Technology (similar in colour to HID / Xenon).
Easy to fit design with adjustable angle.
Highest Light Output Per Cubic Inch on the Market.
Waterproof (3m depth).
1 year warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Philips X-treme Vision 100%

Dan Bailey — Mon, 12 Sep 2016 16:40:34 +0000

The lamps, which are fully road legal and suitable for use in plastic lenses, are great for those that spend considerable time driving at night, especially in country areas. They are good for motorcycles with single front lamps, as the overall light increase gives similar illumination to a pair or ordinary headlights. The brighter, whiter light output also makes your vehicle more visible to pedestrians and other road users.

The performance gain is achieved through a new unique filament design, optimized geometry, a quartz burner and high pressure gas filling to deliver maximum light output and longer life expectancy. The end result is safer night time driving with greater visible distance.

These bulbs are the very best on the market in our opinion, even surpassing the legendary Osram Nightbreaker Plus.

Key Features

Direct replacement for Motorcycle headlight bulbs.
UV Cut to protect plastic lenses.
Up to 100% the light output of stock Motorcycle bulbs.
Superb night vision.
DOT Approved and legal for use with all headlight units.
1 year warranty.
H4 rated 55 / 60 Watt, H7 rated 55 Watt.

Options

Philips X-treme Vision 100% are available in H4 (low and high beam single bulb) and the popular H7 single filament and priced per single bulb.

BikeVis Bullets v1 Motorcycle Running Lights

Dan Bailey — Mon, 12 Sep 2016 16:35:54 +0000

Please note these Bullets are the old version 1 lights, and as such not as bright as our current model.

BikeVis Bullets can be mounted just about any motorcycle and in any location depending on how you want your machine to look, be it on the side of a fairing, tucked away in a ram air scoop or in a wheel arch.

They can be modulated with our PodMod v2 modulator.

Also known as ‘Daytime Running Lights (DRL)’, ‘Driving Lights’, ‘Safety Lights’, ‘Marker Lights’ and ‘LED Spotlights’, the name doesn’t matter but we are sure you’ll love them as do the thousands of other motorcyclists already running them worldwide.

Key Features

Unique miniature design especially for motorcycles (one inch in length).
Ultra bright (white version similar in colour to HID / Xenon and more than 60 lumens).
Motorcycle accessory of the year 2009 – WebBikeWorld.
2 pairs can be modulated with our PodMod v2 modulator.
4 Star rating – Motorcycle Consumer News.
As used in Moto3, BSB and IOM TT race series.
Easy to fit design.
Wide angle visibility.
Weather proof.
Ultra low power (72mA / 1 Watt per Bullet pod yet brighter than 5 Watt sidelights).
Ultra long life.
Lifetime technical support.
1 Year no quibble warranty.
Hand made in the UK by bikers for bikers.

Videos

Kit Contents

2 * BikeVis Bullet LED pods.
1m of wire pre-wired to each pod.
High powered 3M tape for hassle free and safe fitting to your motorcycle.
Templates for mounting.
Fitting Instructions (Download PDF).
Cable ties to keep wires tidy.

Options & Discounts

White light is recommended for motorcycle forward facing use.

Red light is recommended for motorcycle rear facing or braking.

Philips X-treme Vision 130%

Dan Bailey — Mon, 12 Sep 2016 07:43:30 +0000

The performance gain is achieved through a new unique filament design, optimised geometry, a quartz burner and high pressure gas filling to deliver maximum light output and longer life expectancy. The end result is safer night time driving with greater visible distance.

These bulbs are the very best on the market in our opinion.

Key Features

Direct replacement for Motorcycle headlight bulbs.
UV Cut to protect plastic lenses.
Up to 130% the light output of stock Motorcycle bulbs.
Superb night vision.
DOT Approved and legal for use with all headlight units.
1 year warranty.
H4 rated 55 / 60 Watt, H7 rated 55 Watt.

Options

Philips X-treme Vision 130% are available in H4 (low and high beam single bulb) and the popular H7 single filament and priced per single bulb.

Rigid Industries Duallys

Dan Bailey — Sun, 11 Sep 2016 14:39:27 +0000

With this kind of output you will wonder how you ever got by on twisty roads at night with a normal filament headlight (or even a HID Xenon)

As light bulbs age, their colour consistency and brightness diminishes. New replacement bulbs will look noticeably different compared to the remaining bulbs. Customized LED binning ensures only the highest consistency of LED colour and brightness for manufacturing of your Rigid LED products. Rigid LED Lights are turned on quickly and efficiently with little battery draw. HID and Xenon technologies quickly drain huge amounts current at start up in order to power the bulbs.

WARNING: These lights are so bright we would urge any owner to please be courteous when other traffic is around and switch them off!. For constant use everyday lights checkout our Cree Aux Lights

Key Features

20 degree flood or 10 degree spot pattern.
20 Watt 1568 Lumen LED Technology.
Small size perfect for Motorcycles (light face is 75mm sq. Depth is 80mm).
Easy to fit design single bolt mounting.
Unbreakable Lexan Lens.
Plug and Play Wiring Harness with Switch.
50,000+ hour life span.
IP68 rating (will operate submerged in water).
1 Year no quibble warranty.
Sourced by BikeVis and tested for reliability under the worst of conditions.

Kit Contents

2 * Rigid Industry Dually Light Pods.
Wiring Harness and Switch.

Options

10° SPOT BEAM – High beam supplement (recommended).
20° FLOOD BEAM – Low beam supplement / Fog lighting.
COMBO – One 10° Spot and one 20° Elliptical light.

**please note these lights cannot be modulated due to high brightness and power consumption.

BikeVis PodMod

Dan Bailey — Sun, 11 Sep 2016 14:16:48 +0000

This PodMod v1 is now replaced by our new PodMod v2. Now in stock and shipping.

Nothing stands out more than a light that ‘Glints’, this effect is usually only seen when the perspective of a light source changes, but if a light is coming towards you or stationary this effect is lost.

Our PodMod module modulates the LEDs extremely fast to address the problem (92.5% on and 7.5% off time) , and doesn’t create a ‘flash’ that could distract others on the road, but creates gentle ‘glinting’ effect.

Key Features

Unique miniature design especially for motorcycles.
Produces unique ‘Glinting’ effect without distracting other road users.
Improve daylight visibility of our range of running lights.
Power one pair of BikeVis Bullet pods.
Power one pair of BikeVis Mini Pods or Strips.
Weather proof.
Create ‘movement’ in light for when approaching static traffic.
Produces unique ‘glinting’ effect without distracting other road users.
Microprocessor controlled for reliability.
Gentle ‘ramp up / fade in’ when you first turn on your ignition.
Lifetime technical support.
2 Year Warranty.
200mA (0.2A) max load so able to drive most other small LED lights.

Videos

Kit Contents

BikeVis PodMod Running Light Modulator.
Pre-wired for easy connection to both new and existing installations.
Fitting Instructions (Download PDF).
Cable ties to keep wires tidy.